RU 
RO 
EN 
Штора ПП с низкой теплоотдачей
MFB EW-120 - это противопожарная штора с низкой тепловой излучающей способностью, которая в случае пожара предотвращает распространение пламени, а также возгорание элементов, находящихся на безопасном расстоянии за счет радиации.
Защитная цель:
- Огнестойкость 120 минут при температуре свыше 1000ºC (Целостность).
- Низкая эмиссия излучения в течение 60 минут при 1000ºC ≤15 кВт/м2.
- Большие размеры.
Характеристики:
Система состоит из технического текстильного материала TECTEX 1120-IT/IN/L2, изготовленного из стекловолокна класса E усиленного сталью Incolel, покрытого алюминиевой фольгой с обеих сторон, которая действует как элемент ограничения теплового излучения.
Техническая схема:
Пожарная штора MFB EW-120 устанавливается с целью обеспечения целостности и снижения радиации. Эта система может заменить системы с тепловой изоляцией при условии соблюдения периметра относительно воспламеняющихся элементов или выхлопных каналов, без необходимости использования систем ирригации.
Costul livrării
Отпуск товаров осуществляется после полной оплаты покупателем. Отгрузка выполняется транспортом покупателя со слада Продавца или транспортом Продавца, но за счет Покупателя.Contactează-ne
Сопутствующие товары
TECNITEX MFB EI-180 is an irrigated fire curtain for control and sectorisation in case of fire. It is an automated system which has been designed to guarantee integrity, thermal insulation and non-penetration of smoke for over 180 minutes at temperatures of 1000ºC.
Protective purpose:
-Temperature of non-exposed side under 140ºC (Isolation).
-180 minute fire resistance at over 1000ºC (Integrity).
-Large dimensions of up to 22000 x 17000mm (Width/Height).
Characteristics:
-The system is made up of technical textile reference TECTEX 710- PU/IN/2, made from class E fibreglass reinforced with steel Inconel, covered with a flame retardant polyurethane compound on both sides.
-Irrigation system through open nozzles, activation by electrovalve, or closed sprinklers, -activation by thermal fuse.
Technical diagram:
The TECNITEX MFBI EI-180 fire curtains are installed for the purpose of integrity and thermal isolation, being an effective solution for compartmentalisation between fire sectors. Their versatility, lightness and aesthetics make this system an ideal solution, guaranteeing EI classifications of up to 180 minutes.
TECNITEX MFBH E-120 is a horizontal fire curtain with a sectorized function which guarantees its integrity against direct flames or a temperature of over 1000ºC for 120 minutes, preventing spread to higher levels.
Protection objective:
-Preventing the propagation of flames to the higher levels.
-Fire resistance 120 min at more than 1000ºC (Integrity).
-Large dimensions.
Characteristics:
The system is made up of technical textile reference TECTEX 710-PU/IN/2, made from class E fibreglass reinforced with steel Inconel, covered with a flame retardant polyurethane compound on both sides.
Exploded view:
1.Housing, depending on model, made from galvanized-sheet metal.
2.Removable supports for forming the box and holding the roller (depending on model). Front and lower openings made with rounded edges without sharp edges or corners.
3.Roller with ogive for rolling the textile.
4.Roller for unwinding the fabric.
5.SMK motors according to model with technology. TGFS (Total Gravity Controlled Fail Safe Solution).
6.Side guides with fabric retention system over its entire length.
7.Fabric retention system along the entire length of the curtain for proper insulation from fire and smoke (optional).
8.Technical fiberglass fabric with different finishes depending on the model and system classification.
9.Fabric retention bar.
MFB EW-60/90 is a fire curtain with low thermal emissivity which, in case of fire, prevents the spread of flames, in addition to ignition of elements located at a safe distance by radiation.
Protective purpose:
– 120 minute fire resistance at over 1000ºC (Integrity).
-Low emission of radiation for 60 minutes at 1000ºC ≤15 Kw/m2.
-Large dimensions of up to 12000 x 8000mm (Width/Height).
Characteristics:
The system is made up of technical textile reference TECTEX 1120-IT/IN/L2, made from class E fibreglass reinforced with steel Inconel, covered with aluminium foil on both sides, acting as an element to limit thermal radiation.
Technical diagram:
The MFB EW-90 fire curtain is installed with the purpose of integrity and reduced radiation. This system may replace systems with thermal isolation provided that a perimeter area is respected with regard to flammable elements or exhaust channels, without the need for irrigation systems.
The concertina fire curtain model MFB-BLIND E-120 is an invisible compartmentalising system that allows the isolation of a specific section of any given environment.
Thanks to its configuration, it is possible to create completely open spaces since no side guides are required. Its purpose is to prevent the passage of flames from the affected area to the adjacent area in the event of a fire, thus preventing the fire from spreading.
It is a concealed system that remains retracted in its head box until activated, which is done by generating an automatic and controlled deployment.
Fire curtains accordion type represent a light, aesthetic and innovative solution for the design of open spaces that are free of obstacles, without losing the requirements of compartmentalisation between fire sections.
Protection objective:
-Fire resistance 120 min 1000ºC (Integrity).
-No thermal insulation.
-No low radiation emission property.
Features:
-The intended use of the system is to remain continuously open, and close only in the event of a fire when an activation signal is received from the control panel or any fire detection element within the building. The MFB BLIND E-120 concertina fire protection curtains are installed for the maintenance of integrity only, therefore it must be taken into account that in the event of an advanced fire, due to the emission of heat radiation, the elements in the adjacent sector could be affected.
-The systems are not intended to be reused or reopened for evacuation purposes or for access by fire-fighting personnel.
Exploded view:
1.Head box galvanised sheet finish.
2.Removable supports for the reinforcement of the box and roller holding. Front opening. Manufactured with rounded edges without edges or corners
3.Roller without warhead for winding the strips.
4.Motor SMK depending on model with technology “TGFS” Total Gravity Fail Safe Solution.
5.Container tray of fabric.
6.Metal straps for elevation and descent of the tray.
7.Fiberglass technic fabric.
8.Motor SMK on model with technology “TGFS” Total Gravity Controled Fail Safe Solution.
9.Control Unit CST2.
*Note: The visible parts of the system can be customised by baked-on paint coating in a RAL colour of your choice.
TECNITEX MFB E-120 is a comprehensive fire curtain with a sectorised function which guarantees its integrity against direct flames or a temperature of over 1000°C for 120 minutes.
Protective purpose:
-Preventing the propagation of flames to the neighbouring sector.
-Fire resistance for 120 minutes at over 1000ºC (Integrity).
-Large dimensions of up to 12000 x 8000mm (Width/Height).
Characteristics:
The system is made up of technical textile reference TECTEX 710-PU/IN/2, made from class E fibreglass reinforced with steel Inconel, covered with a flame retardant polyurethane compound on both sides.
Technical diagram:
The TECNITEX MFB E-120 fire curtain is installed with the intent of integrity, where in the case of a fire advancing, the elements of the adjoining sector may be affected by the emission of thermal radiation. These systems are especially suitable for outdoor areas, or areas where there are no flammable elements near the unexposed face.
Tecnitex MFBD E-120 is a modular (overlapping) fire curtain that remains intact when exposed to a direct attack by flames or a temperature greater than 1000 ºC for 120 minutes, preventing the passage of flames from one sector to another. It is an invisible fixture, the purpose of which is to prevent the passage of flames from one sector to another, thus limiting the spread of the fire.
Protective purpose:
-Avoiding the spread of flames to the neighboring sector.
-Fire resistance 120 min at more than 1000 ºC (Integrity).
-Reducing radiation 30 min.
-Large dimensions, unlimited length up to 10,000 mm in height.
Characteristics:
-The system is made up of technical fabric with the reference TECTEX 710-PU/IN/2, made of class E fiberglass reinforced with Inconel steel, covered with a fire-retardant polyurethane-based compound on both sides.
– OPTIONAL
Ral to choose.
Closing or opening buttons.
– ADVANTAGE
Pre-assembled systems.
Modular configuration with standardized parts.
Technical scheme:
-The TECNITEX MFB E-120 fire curtain is installed for integrity, so it must be taken into account that, in the event of an advanced fire, after 30 minutes of its EW-30 classification, the elements of the adjoining sector could be affected due to the emission of thermal radiation. These systems are especially suitable for outdoor areas, or areas where there are no flammable elements close to the unexposed side
-Drawer options:
CDV: Vertical container drawer with front and lower register.
CDH: Horizontal container drawer with lower register.
CDVF: Vertical container drawer with inverted front and lower register.
Отзывы
Пока нет отзывов.