EN 
RO 
RU 
-
Uși Proget MultiUșă metalică, complet galvanizată și vopsită în culori RAL, grosimea tocului de 60mm. Interiorul foii de ușă este umplut cu vată minerală pentru izolare termică și acustică. Tocul robust se potrivește ideal pentru uși de dimensiuni mari sau pentru pereți slabi. -
Fire curtain with low thermal emissivity MFB EW-60/90MFB EW-60/90 is a fire curtain with low thermal emissivity which, in case of fire, prevents the spread of flames, in addition to ignition of elements located at a safe distance by radiation.
Protective purpose:
– 120 minute fire resistance at over 1000ºC (Integrity).
-Low emission of radiation for 60 minutes at 1000ºC ≤15 Kw/m2.
-Large dimensions of up to 12000 x 8000mm (Width/Height).
Characteristics:
The system is made up of technical textile reference TECTEX 1120-IT/IN/L2, made from class E fibreglass reinforced with steel Inconel, covered with aluminium foil on both sides, acting as an element to limit thermal radiation.
Technical diagram:
The MFB EW-90 fire curtain is installed with the purpose of integrity and reduced radiation. This system may replace systems with thermal isolation provided that a perimeter area is respected with regard to flammable elements or exhaust channels, without the need for irrigation systems.
-
MONOROOF TPOInsulating roof system with polyurethane foam, plan and small slope ≥1%.
Panou metalic autoportant termoizolant, cu miez de spumă poliuretană rigidă, fără CFC&HCFC.
MONOROOF® TPO is ideal for pre-waterproofed covering of flat and low-pitched roofs. The synthetic layer of total thickness 1.5mm, consists of a top impermeable and UV-resistant flexible polyolefin layer, reinforced with a glass mat, and is fleece backed with woven-non-woven polyester in order to guarantee the adhesion to the polyurethane insulation layer. A series of accessories is available for the complete waterproofing of all sensitive points of a flat roof. All joints are sealed by means of thermo welding.
Panels thickness: 30mm – 100mm.
Panels length: 13500mm.
-
Fire curtain modular MFBD E-120Tecnitex MFBD E-120 is a modular (overlapping) fire curtain that remains intact when exposed to a direct attack by flames or a temperature greater than 1000 ºC for 120 minutes, preventing the passage of flames from one sector to another. It is an invisible fixture, the purpose of which is to prevent the passage of flames from one sector to another, thus limiting the spread of the fire.
Protective purpose:
-Avoiding the spread of flames to the neighboring sector.
-Fire resistance 120 min at more than 1000 ºC (Integrity).
-Reducing radiation 30 min.
-Large dimensions, unlimited length up to 10,000 mm in height.
Characteristics:
-The system is made up of technical fabric with the reference TECTEX 710-PU/IN/2, made of class E fiberglass reinforced with Inconel steel, covered with a fire-retardant polyurethane-based compound on both sides.
– OPTIONAL
Ral to choose.
Closing or opening buttons.
– ADVANTAGE
Pre-assembled systems.
Modular configuration with standardized parts.
Technical scheme:
-The TECNITEX MFB E-120 fire curtain is installed for integrity, so it must be taken into account that, in the event of an advanced fire, after 30 minutes of its EW-30 classification, the elements of the adjoining sector could be affected due to the emission of thermal radiation. These systems are especially suitable for outdoor areas, or areas where there are no flammable elements close to the unexposed side
-Drawer options:
CDV: Vertical container drawer with front and lower register.
CDH: Horizontal container drawer with lower register.
CDVF: Vertical container drawer with inverted front and lower register.
-
MONOROOF AGROSelf-supporting thermal insulated metal panel, with insulation core of CFC & HCFC-free polyurethane rigid foam.
MONOROOF ® AGRO is ideal for covering of farming installations. It consists of an external face of corrugated steel sheet (load bearing) and an internal flat face of glass-fiber reinforced polyester, resistant to microorganisms, bacteria and vapors and condensations filled with organic acids that are usually found in breading farms. The intermediate insulation layer of rigid polyurethane foam offers the necessary protection against temperature variations.
Panels thickness: 30mm – 100mm.
Panels length: 13500mm.
-
HIPERTEC ROOFSelf-supporting thermal insulated metal panel, with insulation core of non-combustible & soundproof rockwool.
HIPERTEC® ROOF este ideal pentru acoperișurile înclinate (≥7%), oferind rezistență ridicată la foc și izolare acustică. Materialul de bază include vată minerală din fribre orientate cu densitate ridicată, aranjate în mod perpendicular față de nivelul panoului și poziționate în benzi dispuse longitudinal cu îmbinări decalate și compactate transversal în așa fel încât să umple în totalitate spațiul dintre fețele de oțel. În timpul instalării trebuie asigurată la marginile panoului o protecție împotriva umezelii.
Panels thickness: 50mm – 150mm.
Panels length: up to 13500mm.
-
MFB E-120 Outdoor area fire curtainTECNITEX MFB E-120 is a comprehensive fire curtain with a sectorised function which guarantees its integrity against direct flames or a temperature of over 1000°C for 120 minutes.
Protective purpose:
-Preventing the propagation of flames to the neighbouring sector.
-Fire resistance for 120 minutes at over 1000ºC (Integrity).
-Large dimensions of up to 12000 x 8000mm (Width/Height).
Characteristics:
The system is made up of technical textile reference TECTEX 710-PU/IN/2, made from class E fibreglass reinforced with steel Inconel, covered with a flame retardant polyurethane compound on both sides.
Technical diagram:
The TECNITEX MFB E-120 fire curtain is installed with the intent of integrity, where in the case of a fire advancing, the elements of the adjoining sector may be affected by the emission of thermal radiation. These systems are especially suitable for outdoor areas, or areas where there are no flammable elements near the unexposed face.
-
HIPERTEC ROOF SOUNDSelf-supporting thermal insulated metal panel, with insulation core of non-combustible & soundproof Rockwool.
HIPERTEC® ROOF SOUND is ideal for covering of pitched (≥7%) roofs, offering optimum sound absorption and good sound insulation. The core material consists of orientated fiber high density Rockwool, arranged perpendicularly to the plane of the panel and positioned in strips, laid longitudinally with offset joints and transversely compacted, in such a way as to completely fill the space between the metal facings. During installation, protection against moisture should be provided for at the panel's eaves. Due to the perforated (vapor permeable) internal face, the indoor temperature & humidity parameters should be taken into consideration during the design phase.
Panels thickness: 50mm – 150mm.
Panels length: up to 13500mm.
-
MFB EI-180 Irrigated fire curtainTECNITEX MFB EI-180 is an irrigated fire curtain for control and sectorisation in case of fire. It is an automated system which has been designed to guarantee integrity, thermal insulation and non-penetration of smoke for over 180 minutes at temperatures of 1000ºC.
Protective purpose:
-Temperature of non-exposed side under 140ºC (Isolation).
-180 minute fire resistance at over 1000ºC (Integrity).
-Large dimensions of up to 22000 x 17000mm (Width/Height).
Characteristics:
-The system is made up of technical textile reference TECTEX 710- PU/IN/2, made from class E fibreglass reinforced with steel Inconel, covered with a flame retardant polyurethane compound on both sides.
-Irrigation system through open nozzles, activation by electrovalve, or closed sprinklers, -activation by thermal fuse.
Technical diagram:
The TECNITEX MFBI EI-180 fire curtains are installed for the purpose of integrity and thermal isolation, being an effective solution for compartmentalisation between fire sectors. Their versatility, lightness and aesthetics make this system an ideal solution, guaranteeing EI classifications of up to 180 minutes.
-
Concertina fire curtain MFB-BLIND E-120The concertina fire curtain model MFB-BLIND E-120 is an invisible compartmentalising system that allows the isolation of a specific section of any given environment.
Thanks to its configuration, it is possible to create completely open spaces since no side guides are required. Its purpose is to prevent the passage of flames from the affected area to the adjacent area in the event of a fire, thus preventing the fire from spreading.
It is a concealed system that remains retracted in its head box until activated, which is done by generating an automatic and controlled deployment.
Fire curtains accordion type represent a light, aesthetic and innovative solution for the design of open spaces that are free of obstacles, without losing the requirements of compartmentalisation between fire sections.
Protection objective:
-Fire resistance 120 min 1000ºC (Integrity).
-No thermal insulation.
-No low radiation emission property.
Features:
-The intended use of the system is to remain continuously open, and close only in the event of a fire when an activation signal is received from the control panel or any fire detection element within the building. The MFB BLIND E-120 concertina fire protection curtains are installed for the maintenance of integrity only, therefore it must be taken into account that in the event of an advanced fire, due to the emission of heat radiation, the elements in the adjacent sector could be affected.
-The systems are not intended to be reused or reopened for evacuation purposes or for access by fire-fighting personnel.
Exploded view:
1.Head box galvanised sheet finish.
2.Removable supports for the reinforcement of the box and roller holding. Front opening. Manufactured with rounded edges without edges or corners
3.Roller without warhead for winding the strips.
4.Motor SMK depending on model with technology “TGFS” Total Gravity Fail Safe Solution.
5.Container tray of fabric.
6.Metal straps for elevation and descent of the tray.
7.Fiberglass technic fabric.
8.Motor SMK on model with technology “TGFS” Total Gravity Controled Fail Safe Solution.
9.Control Unit CST2.
*Note: The visible parts of the system can be customised by baked-on paint coating in a RAL colour of your choice.
-
FRIGOWALLSelf-supporting thermal insulated metal panel, with insulation core of CFC & HCFC-free polyurethane rigid foam.
FRIGOWALL® is designed to provide a complete solution to the requirements of the cold storage industry, offering high thermal resistance, vapor-proof joint, mechanical resistance, dimensional stability, and quick and easy installation, combined with an aesthetically pleasing appearance. The labyrinth - type longitudinal joint ensures optimum performance both in positive and negative temperature applications. The panel's faces are available in staved or in micro-ribbed finishing profiles.
Panels thickness: 100mm – 200mm.
Panels length: up to 13500mm.
-
GLAMETSelf-supporting thermal insulated metal panel, with insulation core of CFC & HCFC-free polyurethane rigid foam.
GLAMET® is ideal for covering of pitched (≥7%) roofs, offering high thermal and moisture protection. The elegant geometry of the rib renders the panel suitable also for interesting facades’ design. The diagonally profiled joint of the panel, with inner sealing gasket, closes automatically during installation without any further steps. In one operation, thus a thermal bridge-free and safe connection is made. In addition, the G4 element guarantees high installation services and is therefore especially appreciated by professional installers.
Panels thickness: 30mm – 150mm.
Panels length: 13500mm.
